增大 Synology NAS iSCSI 磁碟及已連結到Windows 2008 的分區

環境：
NAS 型號：Synology DS1512+
NAS 的 DSM版本：DSM 4.1-2668

Server OS: Windows 2008 Server (Eng Vision)

假設：
iSCSI LUN的名字：LUN-1
原來 iSCSI 的磁碟大小：30GB
增加磁碟大小：20GB (總共：50GB)
Windows 2008 Driver Letter：H Drive / Data
Windows 2008磁碟名稱：Disk 1 (NTFS)

Synology NAS 設置：

1. 打開 "Storage Manager" -> "iSCSI LUN"
2. 點選 iSCSI LUN "LUN-1" -> "Edit"
3. 更改 "Capacity" 由 30 改成 50 -> "OK"

Windows 2008 設置：

1. 在 "我的電腦" -> 右鼠標按 "Manage" (打開 "Server Manager")
2. 按 "Storage" -> "Disk Manager" 右鼠標按 "Rescan Disks"，"Disk 1" 的配置便會更新
3. 點選 H Drive -> 右鼠標 "Extend Volume" -> 按 "Next"
4. 更新 "Select the amount of space in MB:" 的設定，留意此設定的數值不能大於 "Maximum available space in MB:" ，按 "Next" ->”Finish"

完成

Win NT Domain upgrade to Win 2008 in Virtual Box

Environment:

All server is running in Virtual Box (VM server).

All server is English Version.


Assumption:
NT Domain Name: MS_DOMAIN
192.168.0.15        Real Primary Domain Controller (MS_DOMAIN-PDC)
192.168.0.231     Backup Domain Controller / Virtual Primary Domain Controller (MS_DOMAIN-BDC)
192.168.0.232     Test Windows XP Workstation (WKS-TEST01)

1. Create new VM Guest, setup Network Adapter attached to Bridge Adapter, create new Hard Disk size to 2GB.
2. Install a new Win NT 4.0 as Backup Domain Server.
3. Network protocol should install TCP/IP(assign a static IP) and NetBIOS
   Do not config DNS & WINS
4. Install NT 4.0 Service Pack 6, restart VM Guest.
5. Install Virtual Box Guest Additions, restart VM Guest.
6. Sync with PDC, shut down the VM Guest and backup or take a snapshots.
7. Setup the VM Guest network adapter attached to "Internal Network"
8. Promote BDC to PDC
   "Programs" -> "Administrative Tools(Common)" -> "Server Manager" select your BDC (MS_DOMAIN-BDC), "Computer" -> "Promote to Primary Domain Controller"
9. Take Snapshot for VM Guest
10. Upgrade to Windows 2003
11. When installation is completed, Windows 2003 will ask you setup Active Directory.
    Choose create a new "Domain in a new forest" press next,
    then choose "No, just install and configure DNS on this computer" press next,
    enter Full DNS name "MSDOMAIN.com" (Remove all non letter character),
    choose the forest functional level "Windows 2000" press next > next > next,
    choose "Permission compatible with pre-Windows 2000 server operating systems. 
12. Enter Restore mode password "helloworld" press next > next > next.
13. Restart Computer.
14. Raise AD Functional Level
15. "Start" -> "Administrative Tools" -> "Active Directory Domains and Trusts"
    Right click domain "MS_DOMAIN.com" -> "Raise Domain Functional Level..."
    Click "Raise" -> OK -> OK
16. Restart Windows 2003 and make sure AD work properly, then shut down.
17. Create a new Hard Disk with 10GB space, and use "Clonezilla" to clone the NT4 image to new Hard Disk image.
18. Use GParted to resize the new Hard Disk NTFS Partition to 10GB
19. Insert Windows 2008 Server CD, open command prompt (cmd), goto folder d:\sources\adprep (d: is your DVD drive letter)
20. Run "ADPREP /FORESTPREP"
21. Run "ADPREP /DOMAINPREP"
22. Run "ADPREP /DOMAINPREP /GPPREP"
23. Upgrade to Windows 2008
24. After completed the 2008 upgrade, install "Guest Additions" for Ethernet Card Driver (You Ethernet Card should change to "Intel PRO/1000 MT Server")
25. Raise AD Functional Level Again
    "Start" -> "Administrative Tools" -> "Active Directory Domains and Trusts"
    Right click domain "MSDOMAIN.com" -> "Raise Domain Functional Level..."
    Click "Raise" -> OK -> OK
26. Change Your DHCP Server add put 192.168.0.231 a the primary DNS server.
27. Finish